保定佰程模具制造有限公司
工程模具 , 塑料模具 , 钢模具 , 风电基础模板
高速铁路电缆槽模具设计方式与说明

高速铁路电缆槽模具设计方式与说明在高铁、铁路的建设上的应用都是比较多的,这种模具有塑料和钢板两种材质。钢制的电缆槽模具的制作方式是比较传统的,制作的过程需要的人力资源是比较多的。而且这种模具还有就是这种模具的结构是比较复杂的,所以为了更好的脱模,这种模具内的结构是可以拆分和安装的。


The design method and description of high-speed railway cable trough mold are widely used in the construction of high-speed railway and railway. This mold has two materials: plastic and steel plate. The manufacturing method of steel cable tray mold is more traditional, and the manufacturing process requires more human resources. Moreover, the structure of this mold and this mold is relatively complex, so in order to better demould, the structure in this mold can be disassembled and installed.




在运输的过程中需要利用绳子将预制线缆槽模具固定,这样才能保证在运输的过程中不会出现滑动的情况,这样会出现预制线缆槽模具的形状出现变化甚至是表面出现破损,这都会导致在灌料时出现漏浆的情况,或者是其他的情况,都是消耗了原料而无法得到产品,这对厂商来说是一种浪费,所以应该注意不能出现破损。在运输过程中应该避免阳光的直射,因为直射的阳光会使预制线缆槽模具的塑料原料出现韧性下降的情况,这样在制作的过程中就很容易出现损坏,不能承受如此大的压力,所以需要用防水布将其覆盖,这样才能使其避免遭受损伤,延长使用的寿命。


During transportation, the prefabricated cable trough mold needs to be fixed with rope, so as to ensure that there will be no sliding during transportation. In this way, the shape of the prefabricated cable trough mold will change or even the surface will be damaged, which will lead to slurry leakage during filling, or other situations. Raw materials are consumed and products cannot be obtained, which is a waste to the manufacturer, Therefore, attention should be paid not to damage. Direct sunlight should be avoided during transportation, because direct sunlight will reduce the toughness of the plastic raw materials of the prefabricated cable trough mold, so it is easy to be damaged during the manufacturing process and can not bear such a great pressure. Therefore, it is necessary to cover it with waterproof cloth to avoid damage and prolong its service life.


发布时间:2024-11-01
展开全文
拨打电话 微信咨询 发送询价