预制箱涵模具制作-卧式箱涵模具-立式箱涵模具可多次翻模

预制件构件模具安裝应考虑以下规定:1模具安裝前务必开展清除，模具内表层清除时不可应用铜器清刮，清除后的模具内表层的一切位置不可有残余脏物;2模具安裝应按模具安裝计划方案规定的次序开展;3固定不动在模具上的埋件、预埋孔应部位准、安裝坚固，不可忽略;4模板安裝时要扭紧地脚螺栓，并扭紧至坚固，防止在混凝土浇筑全过程中造成弯折、倾斜;结合当代人自主创变新活观念和的核心理念，大家以不锈钢板材和混凝土为主要元素，另外出示的市场销售与售后维修服务愿与业内盆友真心实意协作，携手同行，共商发展趋势。

The following provisions shall be taken into consideration when installing the mold of prefabricated components: 1. The mold must be removed before installation, and the inner surface of the mold shall not be cleaned with copper tools. All positions of the inner surface of the mold after removal shall be free of residual dirt; 2 The mold installation shall be carried out in the order specified in the mold installation plan; 3 The embedded parts and embedded holes fixed on the mold shall be accurate and firmly installed, which cannot be ignored; 4 During the installation of formwork, the foundation bolts shall be tightened to be firm to prevent bending and inclination during the whole process of concrete pouring; In combination with the core concept of independent innovation and innovation of contemporary people, we take stainless steel plates and concrete as the main elements, and we are willing to sincerely cooperate with friends in the industry in terms of market sales and after-sales maintenance services.

箱涵加工过程完成了单一化、规范化和现代化。生产制造高效率，漯河箱涵模具，质量管理平稳。插口选用遇水后澎涨橡胶圈密封性，每四节方涵拼装成一组，用预应力钢筋钢铰线开展张-紧、抗地基沉降、承重、防潮特性优良，当场工程施工安装操作方便快捷。

The box culvert processing process has been simplified, standardized and modernized. Production efficiency, Luohe box culvert mold, stable quality management. The spigot shall be made of rubber rings that swell after encountering water. Every four square culverts shall be assembled into a group. The prestressed steel hinge wire shall be used to carry out tension tension, resistance to foundation settlement, bearing and moisture resistance. The on-site construction and installation of the project shall be convenient and fast.