水泥化粪池主要用于居民废水处理，粪便环保处理使用，多个化粪池组合在一起可以处理大量的生活废水，减轻了排水设备下水井的压力，粪便，废水等经过化粪池处理后，水质清澈可以直接排入下水道，当累积到一定程度后直接清理化粪池内杂物就可以了，以前化粪池多采用砖砌成型，容易渗漏，生产施工不变，化粪池模具采用混凝土浇筑成型，不渗漏，安装方便快捷是新型的水泥制品。砖混化粪池由于计划、施工、运用、处理等方面的许多疑问，致使95%以上的化粪池运用1- 2年后初步严重渗漏，由于不被人重视，化粪池渗漏疑问严重污染了地下饮用水源和城市地下供水管道，更为严重者形成建筑物不一样程度歪斜。其他，传统砖混化粪池由于缺少技术含量，处理水质差，排出污水严重超支，大大增加了污水处理厂的作业负荷，在无市政管网的少区域将传统化粪池处理后的污水直接排入河湖，给周边河湖水环境带来严重损坏。传统化粪池由于技术含量低，堕落功用差，混凝土化粪池，清掏周期短，假设平常维护处理不到位，还会出现种毒、暴炸等不安全风险。而如今的整体式水泥化粪池完全解决了这些问题。
The cement septic tank is mainly used for the treatment of residential wastewater and the environmental treatment of feces. The combination of multiple septic tanks can treat a large amount of domestic wastewater and reduce the pressure of drainage equipment under the water well. After being treated in the septic tank, the feces and wastewater can be directly discharged into the sewer. When they accumulate to a certain extent, it is OK to directly clean up the sundries in the septic tank. In the past, septic tanks were mostly built with bricks, which is easy to leak, The production and construction remain unchanged. The septic tank mold is cast with concrete, which is non leaking and convenient to install. It is a new type of cement product. Due to many questions about the planning, construction, operation and treatment of brick concrete septic tanks, more than 95% of septic tanks have preliminary serious leakage after 1-2 years of operation. Due to the lack of attention, the leakage of septic tanks has seriously polluted the underground drinking water source and urban underground water supply pipeline, and even more serious, the buildings have different degrees of deflection. In addition, due to the lack of technical content and poor treatment quality of traditional brick concrete septic tanks, the discharged sewage is seriously overspent, which greatly increases the workload of the sewage treatment plant. In a few areas without municipal pipe network, the sewage treated by traditional septic tanks is directly discharged into rivers and lakes, causing serious damage to the surrounding River and lake water environment. Due to the low technical content and poor degradation function of the traditional septic tank, the concrete septic tank has a short cleaning cycle. Assuming that the usual maintenance and treatment are not in place, there will be unsafe risks such as poisoning and explosion. Today's integral cement septic tank completely solves these problems.化粪池钢模具节能环保,符合国家标准,解决能源,受用受力均匀的新结构,广泛应用,,而且成本价低廉,采用新的理念和工艺,更可以节约成本,而且可任意组合,可利用率高,处理污水的能力很强,而且施工期端,安装简单方便,也是今后的发展方向。化粪池模具目前主是以钢模具为主,其中化粪池钢模具成为了主要的生产工艺,先简单介绍一下,化粪池主要用于楼群地下,用于储备生活用水,化粪池需要定时的清理。Septic tank steel mold is energy-saving and environment-friendly, in line with national standards. It is a new structure that solves energy and is evenly stressed. It is widely used, beneficial to the country and the people, and the cost is low. The use of new ideas and processes can save costs. It can be combined arbitrarily, has high availability, and has a strong ability to treat sewage. In addition, it is easy to install at the end of the construction period, which is also the future development direction. At present, the septic tank mold is mainly steel mold, of which the septic tank steel mold has become the main production process. First of all, a brief introduction, septic tank is mainly used for underground buildings, used to store domestic water, and septic tank needs to be cleaned regularly.
