排水槽模具的快速发展

排水槽模具的快速发展,为了满足更高的市场需求作为排水沟模具厂家只有加强排水沟模具生产的薄弱环节才能促进排水沟模具在以后模具市场中实现新的突破.随着新型高科技产品的不断开发,生产环境的不断提高,模具的生产有很大的发展空间,企业可以采用新型的设备和技术,研发先进的冶金方法和工艺,生产高纯净度的优质钢材,增加模具高均匀性,开发并提供出制品化,精品化的模具,提高市场竞争力,抢占市场先机.

With the rapid development of drainage ditch mold, in order to meet the higher market demand, as a drainage ditch mold manufacturer, only by strengthening the weak link of drainage ditch mold production can we promote the drainage ditch mold to achieve a new breakthrough in the future mold market With the continuous development of new high-tech products and the continuous improvement of production environment, there is a lot of room for the development of mold production. Enterprises can adopt new equipment and technology, develop advanced metallurgical methods and processes, produce high-purity high-quality steel, increase the high uniformity of molds, develop and provide finished and high-quality molds, improve market competitiveness and seize market opportunities

从目前农田基本水利工程建设来看，大部分的混凝土水渠都是以使用模具人工预制为主，这样能够保证外形美观而且混凝土制品寿命。渠预制块长度大多是以2米长为主，所以大部分是以平模形式出现，需要在混凝土上面打入吊装孔，使用吊车或者叉车，待混凝土凝固以后吊装出来，这种生产方式虽然耗费时间，但是对于预制块的品质保证非常重要。一般预制时间控制在10个小时，时间短了混凝土凝固不好，时间长了凝固过大业不利于脱模。目前对于该模具使用规格较多的是400*400、600*600、800*800、1000*1000mm的，壁厚随着不同的内径大小而变化。

From the current construction of farmland basic water conservancy projects, most of the concrete canals are manually prefabricated with molds, which can ensure the appearance and the service life of concrete products. Most of the precast blocks of the canal are 2 meters long, so most of them are in the form of flat formwork. It is necessary to drive hoisting holes into the concrete, use cranes or forklifts, and hoist them out after the concrete is solidified. Although this production method is time-consuming, it is very important for the quality assurance of precast blocks. Generally, the prefabrication time is controlled at 10 hours. If the time is short, the concrete will not solidify well, and if the time is long, the excessive solidification is not conducive to demoulding. At present, 400*400, 600*600, 800*800 and 1000*1000mm are used for the mold, and the wall thickness changes with different inner diameter.