电缆管模具生产材料选择

电缆管模具的主要材质是使用4毫米面板，6*80筋板，底部需要使用槽钢支撑，这样才能满足混凝土电缆管震动的需要。从电缆管钢模具的名称来看，也可以称之为电缆管沟、电缆管道模具等。

The main material of the cable duct mold is 4mm panel, 6*80 rib plate, and the bottom needs to be supported by channel steel, so as to meet the needs of concrete cable duct vibration. From the name of steel mould for cable duct, it can also be called cable duct trench, cable duct mould, etc.

当前根电缆管模具系列的需要，长度都是4米结构的，采用大小头对接模式，这样能够保证其紧密性。从混凝土电缆管的加工要求来说，全部都是预制加工，既可以保证其混凝土表面的光滑性，还能更好的满足其要求。电缆管模具形状和分析是一种特殊的模具，在模具生产中也更特殊，模具设计是为了满足不同施工单位的要求，在模具生产中会有不同的规格，模具长度多为4米，模具宽度一般根据施工单位的要求定制，因此各种尺寸不固定，模具前后两端设计有插座，施工对接方便。电缆管模具可以从名称中知道，主要放置在地下铺设电缆，模具整体结构相对简单，模具两侧等类型的模具设计略有不同，将根据施工设计图纸要求制作8+2.12+4，或其他形状的模具，其他类型的模具加工略有不同，需要使用聚氯乙烯管连接模具孔，然后按步骤预制。

According to the requirements of the current root cable duct mold series, the length is 4m, and the large and small end butt joint mode is adopted to ensure its tightness. In terms of the processing requirements of concrete cable ducts, they are all prefabricated, which can not only ensure the smoothness of the concrete surface, but also better meet its requirements. The shape and analysis of the cable duct mold is a special mold, which is more special in the mold production. The mold design is to meet the requirements of different construction units. There will be different specifications in the mold production. The mold length is mostly 4 meters, and the mold width is generally customized according to the requirements of the construction unit. Therefore, various sizes are not fixed. Sockets are designed at the front and rear ends of the mold, which is convenient for construction and docking. As can be seen from the name of the cable pipe mold, it is mainly placed underground to lay cables. The overall structure of the mold is relatively simple. The design of the mold on both sides of the mold is slightly different. The mold of 8+2.12+4 or other shapes will be made according to the requirements of the construction design drawings. The processing of other types of molds is slightly different. PVC pipes need to be used to connect the mold holes, and then prefabricated according to the steps.