灭鼠毒饵站模具制作-多功能防鼠灭鼠模具结构简单 操作便捷

灭鼠毒饵站模具制作-多功能防鼠灭鼠模具结构简单 操作便捷

灭鼠毒饵站模具摆放时应按一定间隔，紧靠墙边、花基丛中或墙角；箱体近洞口端应紧靠墙边并与墙或鼠的跑道平行。在老鼠较多的场所如农贸市场、饮食行业、食堂四周、渣滓中转站点和城中村等场所，应每隔15-20米放置一个；事业单位、住宅区等则可每隔20-30米放置一个；在普通场所的绿化地、围墙边的摆放间距可作恰当调整。该安装的结构简单，便于操作、挪动设点和投放药物。运用时只需将药物放置在底座的饵槽内，再盖上面盖，将该安装放置在老鼠经常出没的中央即可，老鼠经洞口进入安装内摄食饵槽中的药物，即可到达灭鼠效果。

The molds in the rat killing bait station shall be placed at certain intervals, close to the wall, in the flower base cluster or in the corner of the wall; The box near the opening shall be close to the wall and parallel to the wall or mouse runway. In places where there are many rats, such as farmers' markets, catering industry, around canteens, waste transfer stations and urban villages, one should be placed every 15-20 meters; Public institutions and residential areas can place one every 20-30 meters; The spacing between greening grounds and fences in ordinary places can be properly adjusted. The installation has simple structure, and is convenient for operation, moving the setting point and drug delivery. When using, just place the drug in the bait slot of the base, cover the upper cover, and place the installation in the center where the rats often come and go. The rats can enter the installation through the hole to ingest the drug in the bait slot to achieve the rat killing effect.

灭鼠诱饵站模具 灭鼠诱饵站模具制作是以工程塑料聚丙烯（简称PP）为主要生产原材料的工具。聚丙烯在很多领域都有广泛的应用，这都是因为聚丙烯的性价比很高，它在模具生产领域的应用也十分广泛，不仅可以帮助模具生产厂商节省模具的生产成本，还可以保证生产出质量合格的模具，使用这类材料生产出的模具不仅容易脱模，而且可以反复使用。

Moulds for rat killing bait station Moulds for rat killing bait station are mainly made of engineering plastic polypropylene (PP). Polypropylene is widely used in many fields. This is because of its high cost performance ratio. It is also widely used in mold production. It can not only help mold manufacturers save mold production costs, but also ensure the production of qualified molds. The molds produced with this material can not only be easily demoulded, but also can be used repeatedly.

灭鼠诱饵站模具的生产过程也是相对比较简单的。首先需要准备好生产模具需要的聚丙烯原材料，然后提高生产环境的温度，随着温度的降低，聚丙烯会慢慢开始熔化，等到聚丙烯完全熔化为液体之后，将其倒入到事先准备好的模具生产工具中，随后降低生产环境的温度，使聚丙烯开始凝固，聚丙烯完全凝固成型之后灭鼠诱饵站模具的生产就完成了。在进行模具的生产时需要考虑到聚丙烯的用量问题，一般聚丙烯的用量不宜太少，太少的话容易导致生产出的模具侧壁厚度不均。模具的尺寸问题是不用担心的，引入了机器生产的方式，能够保障生产出的模具的质量。采用毒饵站模具灭鼠省工、省毒饵、持续、平安环保。而传统的投放毒饵方式，只能发挥30％的效率，剩下的毒饵大局部残留在周边的土壤中，对环境和水体形成较大的污染。如今运用的毒饵站模具技术，不只让投饵量大大降低，而且使毒饵可持续发挥作用，不会对环境形成污染。灭鼠毒饵站模具应布放在老鼠栖息、取食和经常活动的场所，如单位院、街道的沿墙边、绿化带、渣滓搜集点、水道进出口左近等，特别是饮食行业、食堂、食品仓库、农贸市场、禽兽养殖场、住宅区、建筑工地、公园等必需设置。

The production process of the mould of the deratization bait station is relatively simple. First, prepare the polypropylene raw materials needed for the production mold, and then increase the temperature of the production environment. With the temperature decreasing, polypropylene will slowly start to melt. When polypropylene is completely melted into liquid, pour it into the prepared mold production tools, and then reduce the temperature of the production environment to make polypropylene start to solidify. After polypropylene is completely solidified, the production of the mold in the rat killing bait station is completed. The amount of polypropylene should be taken into account during the production of the mold. Generally, the amount of polypropylene should not be too small, which may lead to uneven thickness of the side wall of the mold. There is no need to worry about the size of the mold. The introduction of machine production can ensure the quality of the produced mold. Adopt poison bait station mould to kill rats, saving labor and poison bait, sustainable, safe and environmental protection. However, the traditional way of dropping poison bait can only give play to 30% efficiency, and most of the remaining poison bait remains in the surrounding soil, causing greater pollution to the environment and water bodies. The mould technology of poison bait station used today not only greatly reduces the amount of bait, but also enables the poison bait to play a sustainable role and will not pollute the environment. Moulds of rat killing poison bait station shall be placed in places where rats live, feed and often move, such as the unit yard, the wall side of the street, green belts, garbage collection points, the entrance and exit of waterways, etc., especially in the catering industry, canteens, food warehouses, farmers' markets, poultry and animal farms, residential areas, construction sites, parks, etc.