多孔电力电缆管钢模具介绍

多孔电力电缆管钢模具介绍电缆管模具因为孔洞的数量不同，所以在操作过程中只要是制作出来相应形状的孔洞就可以了，把所有的模具都制作出来以后，然后再对数量清点一遍，把模具的数量都表格式的详细的记录好，把模具的情况都记录好以后，在下次需要对模具进行应用的时候直接的就能找到相应的位置，仓库需要及时的进行检查与清理，对模具的情况也需要做到非常的了解

Due to the different number of holes in the cable duct mold, it is enough to make holes of corresponding shape during the operation. After all the molds are made, count the again, and record the mold in tabular format in detail. After recording the mold conditions, you can directly find the corresponding position when you need to apply the mold next time, The warehouse needs to be checked and cleaned in time, and the mold needs to be well understood

多孔电力电缆管钢模具介绍电缆管模具通常采用预制的施工方法，首先需要将模具的部件组装起来，如果模具已经使用了很长时间，就需要检查模具的完整性，需要更换的零件及时更换，然后将模具的内壁均匀的涂抹脱模剂，也需要将PVC管都涂抹上，然后将事先搅拌均匀的泥浆注入模具内，振捣后等待定型后拆下PVC管和模具

Prefabrication construction method is usually adopted for the cable pipe mold. Firstly, the components of the mold need to be assembled. If the mold has been used for a long time, the integrity of the mold needs to be checked, and the parts that need to be replaced need to be replaced in time. Then, the inner wall of the mold needs to be evenly coated with release agent, and the PVC pipes also need to be coated. Then, the mud mixed evenly in advance should be injected into the mold, and the PVC pipe and mold should be removed after vibrating and waiting for finalization