地下电线排管模具 多孔定制

地下电线排管模具 多孔定制电缆管模具单套电缆管模具整体风格多孔定制一般可在模具产品初步固化时脱模，不需要等到水泥完全干燥，以便更快地生产预制块。由于水泥还没有完全干燥，内部湿度可以保证，所以我们在浇水时应该对产品进行遮阳处理，以减轻产品的水蒸发速度。虽然设置了遮阳设备，但为了保证湿度，在后期维护中，我们还需要增加浇水次数，以保证产品质量，通过使用电缆管模具生产不会出现问题，可以有效地帮助我们提高整体生产速度。模具将设计成平模式，由于尺寸较大，所以我们将钢板设计成可拆卸的样式，通常通过螺钉固定，更容易操作，可以很容易地使用模具。生产模具时，钢板厚度会根据规格设计加厚，使其具有更好的稳定性，从而保证客户在生产过程中有更好的

The overall style of a single set of cable duct mold is multi hole customization. Generally, the mold can be demoulded when the mold product is initially cured. It is not necessary to wait until the cement is completely dry, so as to produce precast blocks faster. As the cement is not completely dry and the internal humidity can be guaranteed, we should shade the product during watering to reduce the water evaporation rate of the product. Although sunshade equipment is provided, in order to ensure humidity, we also need to increase watering times in later maintenance to ensure product quality. There will be no problems in production by using cable duct mold, which can effectively help us improve the overall production speed. The mold will be designed in a flat mode. Due to its large size, we design the steel plate in a detachable style, which is usually fixed by screws, making it easier to operate and use the mold easily. During mold production, the thickness of steel plate will be thickened according to the specification design, so that it has better stability, so as to ensure that customers have better